No products in the cart.
Smart RADI-CHIP for iPhone SE, 4, 4S, 5, 5S & 5C Only 0.35mm thin, adheres to the back of your phone and reduces radiation (SAR) exposure by up to 95%* Will not interfere with transmission signal or call reception.
3-5 Radi-Chips $59.95 Each
6+ Radi-Chips $49.95 Each
Proven to reduce exposure to SAR (Specific Absorption Rate) by up to 95%*
Suitable for iPhones 3, 4, 4S, 5, 5C, 5S, SE and just 0.35mm thin, adheres to the back of the Phone and will fit inside almost any mobile phone case**
The Cellsafe® Radi Chip™ patent pending technology consists of multiple layers of specially formulated microwave absorbing materials, combined with a specially engineered passive RF printed PCB chip. These layers absorb most of the transmitted RF signal from the mobile phones antenna while the PCB Chip controls and disperses the signal towards the back of the phone. Devices which claim to act as ‘shields’ may significantly interfere with the normal operation of the phone. Reduced or redirected transmission levels caused by such shielding products can interfere with call reception and quality and may also cause calls to drop out. The Radi Chip technology has been scientifically tested and proven not to interfere with the transmission signal or with call reception, unlike these ‘shielding’ devices.
These layers are sprayed in a form of micro sized particles which is done by specially designed equipment.
The composition is adjusted perfectly to absorb the maximum and equal signal power for the range of transmitted frequency bands from the phones antenna/s.
These layers and our specially designed passive RF printed PCB chip, act as a one way gate to disperse the majority of the signal absorbed towards the back of the phone.
All of this is designed to achieve a better result than just keeping the phone away from users head or body (as recommended by the manufacturers).
The Cellsafe® technology reduces SAR (Specific Absorption Rate) up to 95%* and will not interfere with transmission signal or call reception. Now you can experience the peace of mind of Cellsafe®’s scientifically proven mobile phone radiation reducing technology in a whole new way. Enjoy the freedom to choose your own mobile phone case*.
This discreet chip is placed on the back of your phone and at just 0.35mm is thin enough to allow fitting of any mobile phone case over the top.
The Radi Chip™ can also be used on your mobile phone without a case.
Proven to reduce your exposure to SAR by up to 95%*
* Refer to test results page for individual results according to phone model and frequency band. Available in four versions for mobile phones, one for iPhone 3,4,4S,5,5C,5S & SE one for iPhone 6, 6+, 6S, 6S+, one for Samsung Galaxy S6/S6 Edge, S6 Edge Plus, S7, S7 Edge & one for most other Android & Windows Smart phones (eg: Samsung, HTC, Nokia, Sony, LG, Motorola & Blackberry).
** Not suitable for use if the mobile phone is placed inside a protective case (or is used with other accessories) which are made of aluminium or any other type of metal as this may affect the performance of the product.
Not suitable for iPads or tablets
Free shipping for orders over $250.
Shipping Flat fee $9.95 per order Australia Wide
For international orders go to www.cellsafe.com >>