RADI CHIP TECHNOLOGY AND HOW IT WORKS FOR MOBILE PHONES AND IPADS.

The Technology:

The Cellsafe® Radi Chip™ patent pending technology is a combination of absorbent materials, combined with a specially engineered passive RF coupler. These layers absorb most of the transmitted RF signal from the mobile phones antenna while the RF coupler controls and disperses the signal towards the back of the phone. All of this is done without reducing the phones signal strength.

The process:

These layers are sprayed in a form of micro sized particles which is done by specially designed equipment.

Conclusion:

All of this is designed to achieve a better result than just keeping the phone away from users head or body (as recommended by the manufacturers).
The Cellsafe® technology reduces SAR (Specific Absorption Rate) up to 95% lower than the various legal safety limits without reducing the phones performance. Now you can experience the peace of mind of Cellsafe®’s scientifically proven mobile phone radiation reducing technology in a whole new way. Enjoy the freedom to choose your own mobile phone case*.

This discreet chip is placed on the back of your phone and at just 0.35mm is thin enough to allow fitting of any mobile phone case over the top.

The Radi Chip™ can also be used on your mobile phone without a case.

Proven to reduce your exposure to SAR by up to 95%* – * Refer to test results page for individual results according to phone model and frequency band.

*Available in four versions for mobile phones, one for iPhone 3,4,4S,5,5C & 5S one for iPhone 6, 6+, 6S, 6S+, one for Samsung Galaxy S6/S6 Edge, S6 Edge Plus & one for all other Android & Windows Smart phones (eg: Samsung, HTC, Nokia, Sony, LG, Motorola & Blackberry.
**Not suitable for use if the mobile phone is placed inside a protective case (or is used with other accessories) which are made of aluminium or any other type of metal as this may affect the performance of the product.

How RADI CHIP works with iPads

image1

Proven to reduce exposure to SAR (Specific Absorption Rate) by up to 99.97% below the ACMA safety limit.

Radi-Chips TM are suitable for all iPads, dual chips adhere to the back of the iPad and at just 0.35mm thin, will fit inside almost any iPad.

The Technology:

The Cellsafe® Radi Chip™ patent pending technology is a combination of absorbent materials, combined with a specially engineered passive RF directional coupler. These layers absorb most of the transmitted RF signal from the iPads phones antennas while the RF directional coupler controls and disperses the signal towards the front of the iPad. .

The iPad chip works as a mirror effect: The iPad antenna sends the signal 360 degrees, when applying the Radi-ChipTM the signal which would have gone to the back of the iPad is then redirected to the front of the device. Much like a light beam directed towards a mirror reflects the light back.

The process:

These layers are sprayed in a form of micro sized particles which is done by specially designed equipment.

The composition is adjusted perfectly to absorb the maximum and equal signal power for the range of transmitted frequency bands from the iPads antenna/s, both cellular (3G / 4G) and Wi-Fi.

These layers and our specially designed passive RF directional coupler disperse the majority of the signal absorbed towards the front of the iPad.

Conclusion:

All of this is designed to minimise your exposure to radiation as recommended by the manufacturers who advise you to keep the device away from your body.

The Cellsafe® technology reduces SAR (Specific Absorption Rate) up to 99.97% (for Wi-Fi – bottom chips) & 99.92% (3G / 4G – Top Chips) lower than the various legal safety limits without reducing the iPads performance. Now you can experience the peace of mind of Cellsafe®’s scientifically proven radiation reducing technology in a whole new way. Enjoy the freedom to choose your own iPad case*.

These discreet chips are placed on the back of your iPad and at just 0.35mm are thin enough to allow fitting of any iPad case over the top.

The Radi Chip™ can also be used on your iPad without a case.

* Available in two versions, one for all cellular (3G / 4G) iPads and one for Wi-Fi only iPads. For iPads which use both cellular (3G / 4G) as well as Wi-Fi please purchase and apply both sets of Radi-Chips TM to your device.
** Not suitable for use if the iPad is placed inside a protective case (or is used with other accessories) which are made of aluminium or any other type of metal as this may affect the performance of the product.